LW1000-6000W Solar Power Systerm Pure Sine Wave Inverter
Key features:
♦All kinds of home appliance, office equipment, solar power system, and other equipments which use single phase power.
♦LCD digital display show voltage, load and battery info in real time.
♦Peak power is three times of rated power.
♦Can work with inductive load such as air conditioner, motor door and so on.
♦Pure sine wave output, available for sensitive load.
♦4-step progressive charging, 7 battery type selector.
♦Fast and powerful charger with 20A/35A/50A/70A/90A
♦Accept generator's energy output.
♦High power factor 1.0, low power consumption.
♦Automatically transfer between battery and line modes.
♦Microprocessor control guarantees high reliability.
♦Bypass without battery connected.
♦Remote control function.
♦Protection against: Over load, over temperature, over charging, low battery.
♦Reverse connection (optional by hard connector), Blackouts
Specification
Model Parameters |
LW1000 |
LW2000 |
LW3000 |
LW4000 |
LW5000 |
LW6000 |
AC Input |
Nominal Power |
1000W |
2000W |
3000W |
4000W |
5000W |
6000W |
Voltage |
120VAC/230VAC |
230VAC |
Acceptable Voltage |
194-243VAC/164-243VAC(wide mode) |
Line low Transfer |
85V±4%/184(154 wide mode±4% ) |
Line low Return |
95V±4%/194(164 wide mode±4% ) |
Line high Transfer |
135V±4%/253±4% |
Line high Return |
127V±4%/243±4% |
Frequency |
50Hz or 60Hz (auto sensing) |
Line low Transfer |
47Hz for 50Hz, 57Hz for 60 Hz |
Line high Transfer |
55Hz for 50Hz, 65Hz for 60 Hz |
Out Input |
Phase &waveform |
Pure Sine Wave(bypass mode sync to input) |
Voltage |
100/110/120/130VAC, 208/220/230/240VAC (bypass mode sync to input) |
Voltage Regulation |
±10%rms(bypass mode sync to input) |
Frequency |
50Hz±0.3Hz(bypass mode sync to input) |
Peak Power |
3 times of rating power |
Short Circuit Protection |
Yes, shutdown after 10ms |
Power Factor |
0.9-1.0 |
DC Input |
Battery Voltage |
12V/24V/48V |
24V/48V |
Minimum Start Voltage |
10V for 12V, 20V for 24V, 40V for 48V |
Low Battery Alarm |
10.5V for 12V, 21V for 24V, 42V for 48V |
Low Battery Transfer |
10V for 12V, 20V for 24V, 40V for 48V |
High Voltage Alarm |
16V for 12V, 32V for 24V,64V for 48V |
Max Charging Current |
20A/35A/50A/70A/90A |
Over charge Voltage |
15.7V for 12V,31.4V for 24V, 62.8V for 48V |
Transfer Efficiency |
Line Mode |
>95% |
Battery Mode |
>88% |
Power saver |
Available when the load is less than 25 Watts |
Indicators |
Switch selector |
Saving Mode is on/off when push the switch forwards/backwards , |
Keeping it horizontal is turning the inverter off. |
Audible Alarm |
Sounding when the heatsink's tem is over 105ºC and shutdown after 30 seconds. |
Protections |
low battery/ over charging /over temp/over load |
Communications |
RS-232/USB(custom-made) |
Enviromental |
Operating Environment |
0-40ºC,0-90%ºC RH(non-condensing) |
Audible Noise |
<60dB |
Net Weight (KG) |
18 |
20 |
22 |
35 |
38 |
40 |
Dimension(LxWxH) |
446×218×179mm |
605×218×179mm |
Product specifications are subject to change without further notice
Factory View