Customization: | Available |
---|---|
Phase: | Single Phase |
Type: | On-line |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Description
Model | EX1K | EX1KL | |
Capacity | VA/W | 1000VA/800W | 1000VA/800W |
Input | Nominal Voltage | 110/115/120VAC or 208/220/230/240VAC | |
Voltage Range | 60~138VAC or 115~300VAC | ||
Frequency Range | 50Hz :46~54Hz; 60Hz : 56~64Hz | ||
Phase | Single phase with Ground | ||
Power Factor | ≥0.97 | ||
Output | Voltage | 110/115/120 (1±2%) VAC or 208/220/230/240 (1±2%) VAC | |
Frequency | 50/60Hz (Adjustable); 50Hz AC Mode: Follow AC, Battery Mode: 50Hz (1±0.2%) 60Hz AC Mode: Follow AC, Battery Mode: 60Hz (1±0.2%) |
||
Wave Form | Pure sine wave | ||
Power Factor | 0.8 | ||
Harmonic Distortion | ≤3% THD (Linear load); ≤7% THD (Non-Linear load) | ||
Overload Capacity | 110%~150% maintain 30s then turn to bypass output; over 150% maintain 200ms |
||
Current Crest Ratio | 3∶1 | ||
Connections | IEC320*4 | ||
Efficiency | Battery Mode | 83% | |
AC Mode | 85% | ||
Battery | Type | Sealed free maintenance lead acid battery | |
Nominal DC voltage | Built in batteries 12v7.0AH | 36Vdc | |
Quantity | 3 PCS | Depend on requested back-up time | |
Back-up Time (Full Load) | ≥6min | Depends on the capacity of external battery bank | |
Recharge Time | 5 hours to 90% of capacity full discharge | Depends on the capacity of external battery bank | |
Charge Current (Max) | 1.0A | 5.0A/8.0A | |
Charge Voltage (Vdc) | 41.1V±0.4V | 41.1V±0.4V | |
Bypass | Automatic Transfer | On overload and UPS failure | |
Before UPS Power-on | Default "ON" user adjustable to "YES" | ||
Transfer Time | 0ms; less than 4ms from inverter to bypass and vice versa | ||
Indicators | LCD Display | UPS status, Battery capacity, loading, Fault code (LCD: I/P&O/P voltage&frequency, Battery voltage) |
|
Audible Alarm | Bypass,battery mode, Battery low, Overload, Fault | ||
Acoustic Noise | At 1 Meter Distance | <45dB | |
Communications | Intelligent RS232 serial port | Software support Windows family software, Linux, Sun network operating system, IBM Aix, Compaq True64 SGI IRIX, FreeBSD, HP-UX and MAC | |
SNMP (Optional) | Remote control UPS through SNMP management and Internet | ||
USB (Optional) | Windows family software and Mac OS | ||
Network Surge Protection | RJ45 I/O port available for network or FAX/ Telephone line/ Modem | ||
Environmental | Operating Temperature | 0~40ºC | |
Operating Humidity | 20-90% (No condensing) | ||
Weight | Net Weight (kgs) | 11 | 5.5 |
UPS Dimension | L*W*H (mm) | 370*145*220 |