| Customization: | Available |
|---|---|
| Nature of Source Flow: | Active Inverter |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model Parameters |
GW1000W | GW2000W | GW2500W | GW3000W | |
| AC Input |
Nominal Power | 1000W | 2000W | 2500W | 3000W |
| Input Voltage Waveform | sinusoidal(utility or generator) | ||||
| Nominal input Voltage | 120/230VAC | ||||
| Input Voltage Range | 70Vac-150Vac for 120V 165Vac-270Vac for 230V | ||||
| Low Line Disconnect | 70Vac±4% for 120V 165Vac±4% for 230V | ||||
| Low Line Re-connect | 80Vac±4% for 120V 175Vac±4% for 230V | ||||
| High Line Disconnect | 136Vac±4% for 120V 263Vac±4% for 230V | ||||
| High Line Re-connect | 131Vac±4% for 120V 253Vac±4% for 230V | ||||
| AC Low AVR Disconnect | 93Vac±4% for 120V 184Vac±4% for 230V | ||||
| Max AC input Voltage | 120V for Max150V, 230V for Max270V | ||||
| Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz | ||||
| AC output |
Output Voltage Waveform | Sine wave | |||
| Power Factor | 0.9~1.0 | ||||
| Nominal Output Voltage (V) | LV:120Vac ±10%rms, HV:230Vac ±10%rms | ||||
| Nominal Output Frequency (Hz) | 50Hz ± 0.3Hz, 60Hz ± 0.3Hz | ||||
| Transfer Time | 15ms(max) | ||||
| AC Charger |
Nominal Charger Current | 20A/35A/50A/70A/90A(Adjustable 5 stages charging current) | |||
| Over charge Protection | Bat.V≥15.5VDC for 12V battery, Bat.V≥31.0VDC for 24V battery, Bat.V≥62.0VDC for 48V battery, beeps 0.5s every 1s & fault after 60s |
||||
| Three-stage charging | Three-stage:Boost cc(constant curren stage),Boost CV(constant voltage stage),float(conatant voltage stage) | ||||
| Efficiency | Efficiency (Battery Mode) | ≥85% | |||
| Efficiency (Line Mode) | >96% | ||||
| Battery Voltage |
Nominal DC input Voltage | 12/24/48VDC | |||
| Low Battery Alarm | 10.5VDC±0.3VDC for 12VDC | ||||
| 21VDC±0.6VDC for 24VDC | |||||
| 42VDC±1.2VDC for 48VDC | |||||
| Low DC input shut-down | 10VDC±0.3VDC for 12VDC | ||||
| 20VDC±0.6VDC for 24VDC | |||||
| 40VDC±1.2VDC for 48VDC | |||||
| High DC input Alarm & Fault |
16VDC±0.3VDC for 12VDC | ||||
| 32VDC±0.6VDC for 24VDC | |||||
| 64VDC±1.2VDC for 48VDC | |||||
| High DC input Recovery | 15.5VDC±0.3VDC for 12VDC | ||||
| 31VDC±0.6VDC for 24VDC | |||||
| 62VDC±1.2VDC for 48VDC | |||||
| System Parameter |
Over-Load Protection | 110%the output,load>150%,beeps 0.5s every 1s,and Fault after 20s | |||
| Output Short Circuit Protection |
Current limit (Fault after 10s) | ||||
| Surge Rating(10s) | 1:3(VA) | ||||
| Power Saver | Load≤25W(Enabled on "P/S auto" Setting of Remote control) | ||||
| Protections | Low battery,over charging,over load,over temp | ||||
| Indicators | LED+LCD Display | ||||
| General Specifications |
Operating Temperature Range |
0ºC~40ºC | |||
| Storage Temperature | -15ºC~60ºC | ||||
| Operation humidity | 5% to 95%(non-condensing) | ||||
| Audible Noise | 60dB max | ||||
| cooling | Forced air,variable speed fan | ||||
| Dimension(L*W*H) | 475*242*182mm | ||||
| Net Weight(kg) | 17.1 | 19.3 | 21 | 22.5 | |
){kind=link}