Customization: | Available |
---|---|
Nature of Source Flow: | Active Inverter |
Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Pure sine wave inverter charger Product Series |
LW1000 | LW2000 | LW3000 | LW4000 | LW5000 | LW6000 | |
General Specification | Input Wave form | Sine wave (Utility or Generator) | |||||
Nominal voltage | 120VAC | 230VAC | |||||
Low voltage trip | 90v + 4% | 184v/154v + 4% | |||||
Low voltage reconnect | 100v + 4% | 194v/164v + 4% | |||||
High voltage trip | 140v + 4% | 253v + 4% | |||||
High voltage reconnect | 135v + 4% | 243v + 4% | |||||
Max input AC voltage | 150VAC | 270VAC | |||||
Nominal input frequency | 50Hz or 60Hz (Auto detect) | ||||||
Low freq trip | 47Hz for 50Hz, 57Hz for 60Hz | ||||||
High freq trip | 55Hz for 50Hz, 65Hz for 60Hz | ||||||
Output wave form | (Bypass mode) same as input | ||||||
Overload protection | Circuit breaker | ||||||
Short circuit protection | Circuit breaker | ||||||
Transfer switch rating | 30amp or 40amp | ||||||
Efficiency on line transfer time | 95%+ | ||||||
Line transfer time | 10ms Typical | ||||||
Bypass without battery connected | yes | ||||||
Max bypass current | 30amp or 40amp | ||||||
Bypass overload current | 35amp or 45amp: Alarm | ||||||
Inverter Specification Output | Output wave form | Pure sine wave | |||||
Output continuous power watts | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | |
Output continuous power VA | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | |
Power factor | 0.9-1.0 | ||||||
Nominal output voltage rms | 120/230VAC | ||||||
Output voltage regulation | 10% rms | ||||||
Output frequency | 50Hz + 0.3Hz or 60Hz + 0.3Hz | ||||||
Nominal efficiency | > 88% | ||||||
Surge ratings | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
Short circuit protection | Yes, fault after 10 seconds | ||||||
Inverter Specification Input | Nominal input voltage | 12V | 24V | 48V | |||
Minimum start voltage | 10V | 20V | 40V | ||||
Low battery alarm | 10.5V | 21V | 42V | ||||
Low battery trip | 10V | 20V | 40V | ||||
High voltage alram | 16V | 32V | 64V | ||||
Power saver | Below 25watts when enabled | ||||||
Power saver | Same switched on/off on remote | ||||||
Charge Mode Specification | Input voltage range | 95-127VAC | 194-243VAC/ 164-243VAC(W) | ||||
Output voltage range | Dependent on battery type | ||||||
Charge current | 35A/70A | ||||||
Battery initial voltage for start up | 0-15.7v for 12v (*2 for 24v; *4 for 48v) | ||||||
Over charge protection shutdown | 15.7v for 12v (*2 for 24v; *4 for 48v) | ||||||
Others | Remote control/RS232/USB | Yes, Optional | |||||
Size: in mm | 1000/2000/3000 Model: 442*218*179 | ||||||
4000/5000/6000 Model: 598*218*179 | |||||||
Net weight | LW1000 | LW2000 | LW3000 | LW4000 | LW5000 | LW6000 | |
18kgs | 20kgs | 22kgs | 35gs | 38kgs | 40kgs |