|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Nature of Source Flow: | Passive inverter |
| Certification: | ISO9001, CE, Cash |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
| Model Parameters | GS1000W | GS2000W | GS2500W | GS3000W | |
| AC Input |
Nominal Power | 1000W | 2000W | 2500W | 3000W |
| Input Voltage Waveform | Sinusoidal (utility or generator) | ||||
| Nominal input Voltage | 120/230VAC | ||||
| Low Line Disconnect | 85Vac±4%(Normal) or 80Vac±4% (Wide) for 120V 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | ||||
| High Line Disconnect | 136Vac±4%(Normal) or 140Vac±4%(Wide) for 120V 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | ||||
| Max AC input Voltage | 120V for Max150V, 230V for Max270V | ||||
| Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz | ||||
| AC output |
Output Voltage Waveform | Sine wave | |||
| Power Factor | 0.9~1.0 | ||||
| Nominal Output Voltage (V) | LV:120Vac ±10%rms, HV:230Vac ±10%rms | ||||
| Nominal Output Frequency (Hz) |
50Hz ± 0.3Hz, 50Hz ± 0.3Hz | ||||
| Solar charger |
Rated Charge Current | 40A | 60A | ||
| PV Input Voltage range | 15VDC-40VDC for 12VDC, 30VDC-55VDC for 24VDC, 60-110VDC for 48V | ||||
| Max.PV open circuit array voltage |
12V for 40Vdc, 24V for 55Vdc, 48V for 110Vdc | ||||
| Charger mode | MPPT | ||||
| PV Low Voltage Re-connect |
PV≥Bat.V+3V | ||||
| PV Low Voltage Disconnect |
PV<=Bat.V | ||||
| Efficiency | ≥97% | ||||
| AC Charger |
Nominal Charger Current |
35A/50A/70A/90A(According to the inverter model) | |||
| 5 stages adjustable charging current | |||||
| Over charge Protection | Bat.V≥15.5VDC for 12V battery, Bat.V≥31.0VDC for 24V battery ,Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | ||||
| Efficiency | Efficiency(Battery Mode) | ≥87% | |||
| Efficiency (Line Mode) | >98% | ||||
| Battery Voltage |
Nominal DC input Voltage | 12/24/48VDC | |||
| Low Battery Alarm | 10.5VDC±0.3VDC for 12VDC | ||||
| 21VDC±0.6VDC for 24VDC | |||||
| 42VDC±1.2VDC for 48VDC | |||||
| High DC input Alarm & Fault |
16VDC±0.3VDC for 12VDC | ||||
| 32VDC±0.6VDC for 24VDC | |||||
| 64VDC±1.2VDC for 48VDC | |||||
| Transfer Time |
20ms(max) | ||||
| System Parameter |
Over-Load Protection | 110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off the output,load>150%, beeps 0.5s every 1s, and Fault after 20s |
|||
| Output Short Circuit Protection |
Current limit (Fault after 10s) | ||||
| Surge Rating(10s) | 1:3(VA) | ||||
| Power Saver | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | ||||
| Protections | Low battery, over charging, over load, over temp | ||||
| General Specifications |
Operating Temperature Range |
0ºC~40ºC | |||
| Storage Temperature | -15ºC~60ºC | ||||
| Operation humidity | 5% to 95%(non-condensing) | ||||
| Audible Noise | 60dB max | ||||
| cooling | Forced air,variable speed fan | ||||
| Dimension(L*W*H) | 480*336*190mm | ||||
| Net Weight(kg) | 19.5 | 23.5 | 25.5 | 28 | |
| Parameters Model | GS4000W | GS5000W | GS6000W | GS7000W | GS8000W | GS10KW | |
| AC Input |
Nominal Power | 4000W | 5000W | 6000W | 7000W | 8000W | 10KW |
| Input Voltage Waveform | Sinusoidal (utility or generator) | ||||||
| Nominal input Voltage | 120/230VAC | 230VAC | |||||
| Low Line Disconnect | 85Vac±4%(Normal) or 80Vac±4% (Wide) for 120V / 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | ||||||
| Low Line Re-connect | 95Vac±4%(Normal) or 85Vac±4% (Wide) for 120V / 194Vac±4%(Normal) or 145Vac±4%(Wide) for 230V | ||||||
| High Line Disconnect | 136Vac±4%(Normal) or 140Vac±4%(Wide) for 120V / 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | ||||||
| High Line Re-connect | 131Vac±4%(Normal) or 135Vac±4% (Wide) for 120V / 253Vac±4%(Normal) or 253Vac±4%(Wide) for 230V | ||||||
| Max AC input Voltage | 120V for Max150V | 230V for Max270V | |||||
| Frequency | 50Hz:41-54Hz / 60Hz:51-64Hz | ||||||
| AC output |
Output Voltage Waveform | Sine wave | |||||
| Power Factor | 0.9~1.0 | ||||||
| Nominal Output Voltage (V) | LV:120Vac ±10%rms / HV:230Vac ±10%rms | HV:230Vac ±10%rms | |||||
| Nominal Output Frequency (Hz) |
60Hz ± 0.3Hz 50Hz ± 0.3Hz | ||||||
| Solar charger |
Rated Charge Current | 60A | |||||
| PV Input Voltage range | 30VDC-55VDC for 24VDC / 60-110VDC for 48V | ||||||
| Max.PV open circuit array voltage |
24V for 55Vdc / 48V for 110Vdc | ||||||
| Charger mode | MPPT | ||||||
| PV Low Voltage Re-connect |
PV≥Bat.V+3V | ||||||
| PV Low Voltage Disconnect |
PV<=Bat.V | ||||||
| Efficiency | ≥97% | ||||||
| AC Charger |
Nominal Charger Current |
35A/50A/70A(According to the inverter model) | |||||
| 5 stages adjustable charging current | |||||||
| Over charge Protection | Bat.V≥31.0VDC for 24V battery ,Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | ||||||
| Three-stage charging | Three stage:Boost cc (constant current stage) | ||||||
| Boost CV (constant voltage stage) | |||||||
| float (conatant voltage stage) | |||||||
| Efficiency | Efficiency(Battery Mode) | ≥87% | |||||
| Efficiency (Line Mode) | >98% | ||||||
| Battery Voltage |
Nominal DC input Voltage | 24/48VDC | 48VDC | ||||
| Low Battery Alarm | 21VDC±0.6VDC for 24VDC | ||||||
| 42VDC±1.2VDC for 48VDC | |||||||
| Low DC input shut-down | 20VDC±0.6VDC for 24VDC | ||||||
| 40VDC±1.2VDC for 48VDC | |||||||
| High DC input Alarm & Fault |
32VDC±0.6VDC for 24VDC | ||||||
| 64VDC±1.2VDC for 48VDC | |||||||
| High DC input Recovery |
31VDC±0.6VDC for 24VDC | ||||||
| 62VDC±1.2VDC for 48VDC | |||||||
| Transfer Time |
AC to DC | 20ms(max) | |||||
| DC to AC | 15ms(max) | ||||||
| System Parameter |
Over-Load Protection | 110%<load<150%,beeps 0.5s every 1s,and Fault after 60s off the output,load>150%,beeps 0.5s every 1s,and Fault after 20s |
|||||
| Output Short Circuit Protection |
Current limit (Fault after 10s) | ||||||
| Surge Rating(10s) | 1:3(VA) | ||||||
| Power Saver | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | ||||||
| Protections | Low battery, over charging, over load, over temp | ||||||
| Indicators | LED+LCD Display | ||||||
| General Specifications |
Operating Temperature Range |
0ºC to 40ºC | |||||
| Storage Temperature | 15ºC~60ºC | ||||||
| Operation humidity | 5% to 95%(non-condensing) | ||||||
| Audible Noise | 60dB max | ||||||
| cooling | Forced air,variable speed fan | ||||||
| Dimension(L*W*H) | 530*400*190mm | 627*416*204mm | |||||
| Net Weight(kg) | 30.0kg | 35.5kg | 38.5kg | 41.5kg | 48.0kg | 55.0kg | |
