| Customization: | Available |
|---|---|
| Nature of Source Flow: | Active Inverter |
| Certification: | ISO9001, CE, Cash |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1-12KW Hybrid MPPT Inverter Solar Power Inverter Pure Sine Wave Inverter
Main Features
1. 1-12KW Off Grid Pure Sine Wave Solar Inverter With AVR Function
| MODEL (GW Series) |
HV/LV Model | ||||
| HV Model(1-12KW) LV Model(1-6KW) | |||||
| Line Mode Specifications: | |||||
| Input Voltage | Input Voltage Waveform | Sinusoidal (utility or generator) | |||
| Nominal Input Voltage | LV 120Vac | HV 230Vac | |||
| Low Line Disconnect | Normal:85Vac±4% Wide:80Vac±4% | Normal:184Vac±4% Wide:135Vac±4% | |||
| Low Line Re-connect | Normal:95Vac±4% Wide:85Vac±4% | Normal:194Vac±4% Wide:145Vac±4% | |||
| High Line Disconnect | Normal:136Vac±4% Wide:140Vac±4% | Normal:263Vac±4% Wide:263Vac±4% | |||
| High Line Re-connect | Normal:131Vac±4% Wide:135Vac±4% | Normal:253Vac±4% Wide:253Vac±4% | |||
| Max AC Input Voltage | 150Vrms | 270Vrms | |||
| Input Frequency | Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | |||
| Low Line Frequency Re-connect | 51+0.3Hz for 60Hz; 41+0.3Hz for 50Hz; |
||||
| Low Line Frequency Disconnect | 50+0.3Hz for 60Hz; 40+0.3Hz for 50Hz; |
||||
| High Line Frequency Re-connect | 64+0.3Hz for 60Hz; 54+0.3Hz for 50Hz; |
||||
| High Line Frequency Disconnect | 65+0.3Hz for 60Hz; 55+0.3Hz for 50Hz; |
||||
| main functions | Output Voltage Waveform | As same as Input Waveform | |||
| Over-Load Protection (SMPS load) | Air switch | ||||
| Output Short Circuit Protection | Air switch | ||||
| Max Bypass Overload Current | 30A/40A/50A | ||||
| Battery Invert Mode Specifications: | |||||
| output | Output Voltage Waveform | Sine wave | |||
| Rated Output Power (KW) | LV:1~6KW | HV: 1~12KW | |||
| Power Factor | 0.9~1.0 | ||||
| Nominal Output Voltage (V) | LV:120Vac ±10%rms | HV:230Vac ±10%rms | |||
| Nominal Output Frequency (Hz) | 60Hz ± 0.3Hz 50Hz ± 0.3Hz |
||||
| DC Voltage | Nominal DC Input Voltage | 12VDC/24VDC/48VDC | |||
| DC Voltage range | 10-15.5Vdc for 12VDC 20-31.0Vdc for 24VDC 40-62.0Vdc for 48VDC |
||||
| Low Battery Alarm | 10.5Vdc ± 0.3Vdc for 12V battery 21.0Vdc ± 0.6Vdc for 24V battery 42.0Vdc ± 1.2Vdc for 48V battery |
||||
| Low DC input Shut-down | 10.0Vdc ± 0.3Vdc for 12V battery 20.0vdc± 0.6Vdc for 24V battery 40.0Vdc ± 1.2Vdc for 48V battery |
||||
| High DC input Alarm & Fault | 16Vdc ± 0.3Vdc for 12V battery 32Vdc ± 0.6Vdc for 24V battery 64Vdc ± 1.2Vdc for 48V battery |
||||
| High DC input Recovery | 15.5Vdc ± 0.3Vdc for 12V battery 31.0Vdc ± 0.6Vdc for 24V battery 62.0Vdc ± 1.2Vdc for 48V battery |
||||
| AC Charger | Nominal Charge Current | 20A/35A/50A/70A/90A(5 stages adjustable charging current) | |||
| Charge Current Regulation | ± 5Adc | ||||
| Over Charge Protection | Bat.V≥15.5VDC for 12V battery Bat.V≥31.0VDC for 24V battery Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s |
||||
| Algorithm | Three stage: Boost CC (constant current stage) → Boost CV (constant voltage stage) → Float (constant voltage stage) | ||||
| Solar charger | Rated Charge Current | 40A | 60A | ||
| Rated charge battery Voltage type | 12V/24V/48V | 12V/24V | |||
| Max.PV open circuit array voltage | 12V for 40Vdc 24V for 55Vdc 48V for 110Vdc |
||||
| Charger mode | MPPT | ||||
| PV Low Voltage Re-connect | PV≥Bat.V=3V | ||||
| PV Low Voltage Disconnect | PV<=Bat.V | ||||
| Efficiency | ≥97% | ||||
| Efficiency | Efficiency (Battery Mode) | ≥85% | |||
| Efficiency (Line Mode) | >98% | ||||
| Transfer Time | Ac to Dc | 20ms (Max) | |||
| Dc to Ac | 15ms (Max) | ||||
| System parameter | Over-Load Protection | 110% <load<150%, beeps 0.5s every 1s, and Fault after 60s off the output, Load>150%, beeps 0.5s every 1s, and Fault after 20s. | |||
| Output Short Circuit Protection | Current limit (Fault after 10s) | ||||
| Surge rating (10s) | 1:3 (VA) | ||||
| Power saver | Load <=25W (Enabled on "P/S auto" setting of Remote control) | ||||
| Protections | Low battery, over charging, over load , over temp. | ||||
| Indicators | LED+LCD Display | ||||
| General Specifications | Operating Temperature Range | 0°C to 40°C | |||
| Storage temperature | -15ºC ~60ºC | ||||
| Operation humidity | 5% to 95%(non-condensing) | ||||
| Audible Noise | 60dB max | ||||
Company Profile:
About ZLPOWER
Founded in 2007, Shenzhen ZLPOWER Electronics Co., Ltd. (ZLPOWER for short) is a key hi-tech enterprise in state "Torch Plan, " integrating science, industry, trade, and investment into a whole. It has registered capital of RMB 10million, covering a floor area of 2000sq. M, and owning assets of RMB 30 million.
As a large-scale enterprise group with total assets exceeding RMB 30 million, it currently employs more than 300 staff, operates R & D institutions, 10 products lines, and 8 overseas branches and offices for sales and service.
Also as a professional uninterruptible power supply manufacturer in Shenzhen, China, ZLPOWER mainly produce high frequency online UPS, computer PC UPS, rack mount online UPS, low frequency Industry three phase UPS, UPS Inverter, solar inverter, solar charger controller, Solar/UPS Battery and other related products.
In ZLPOWER, we are strictly on quality inspections. We implement strict IOC, IPQC, FQC, OQC, QA, and other quality control measures in every process according to ISO9001, including to raw materials selection, production, package, and shipment.
Thus, we are ISO9001: 2008 and SGS certificated, and all our UPS, Inverter power supply products have been approved by CE (LVD/EMC), UL tests. As a result, they are popular among our customers from Italy, Germany, South Africa, Egypt, Mozambique, Nigeria, UAE, Ukraine, Russia, Uzbekistan, Philippines, Chili, Peru, Brazil, Mexico and more.
ZLPOWER is looking for agent worldwide to distribute our quality UPS system, Inverter power and solar products to their local markets. Any interests please welcome to contact us today and look for best power solution.
){kind=link}