Online UPS Double Conversion 6kVA,10kVA,110V ,220V
DX6K-DX3120KL/Ex6K-EX3120KL
, adopts the double conversion online architecture ideal for resolving all issues on power supply. This state-of-the-art solution is especially designed for eliminating the power loss, extra high or low voltage of utility power, voltage sags or damped oscillation, high-voltage pulse, voltage fluctuation, surge voltage, harmonic distortion, clutter immunity, and frequency fluctuation etc., delivering safe and reliable power supply guarantee for user's load.
Specifications
Environments: Office Server Room Industry
Input-Output: 1 in/1 out 3 in/ 1 out
Power: 6kVA-20kVA
DX6K-DX3120KL is a powerful product range with high adaptability and flexibility. Its cut-edge digital control technology of DSP (Digital Signal Processor), can greatly improve the product performance and system reliability, and deliver a compact integration with higher power density. Meanwhile, DX6K-DX3120KL is especially tailored for all customer's personalized demands to provide powerful scalable functions. The unit can be flexibly configured on user's demands.
Output power factor up to 0.8 applicable to the tendency of future load evolution, and deliver higher payload capability. Total power factor up to 90% can minimize the power loss of UPS and utilization cost for user. Active power factor correction (PFC) technology allows the input power factor approaching to 1, dramatically reducing the immunity on utility grid. Wider range of input voltage tailored for China grid can be suitable to all severe environments. Excellent input frequency range makes UPS suitable to different power supply devices, i. e. Generator set.
Flexible Configuration on Demand
High Scalability: Fully meet the customer's demands. Online Intervention: Safe and online intervention without any power supply interruption to load. Emergency Power Off (EPO): UPS can be instantly shut off in case of any emergency. Parallel Kit: Realize the parallel extension and redundancy function, offer more flexibility and safety for user's power supply planning. Dust-proof Kit: Increases the dust-proof level in industrial environment. Isolating Transformer: Offer isolation protection for the user.
Compact Design, Lower Noise
With leading control technology and craftsmanship, this UPS can greatly increase the power density and reduce the footprint, therefore save more expensive space in your office environment. Additionally, its lower noise during operation can allow you a more comfort working environment.
Intelligent battery management
With its advanced intelligent charge control mode, UPS can automatically select the optimal charge mode as per the battery type and conditions, thus further maximizing the lifespan of battery bank. In addition, the system can periodically conduct the charge & discharge management for the battery bank. User also can select the battery voltage (192V or 240V) on demands. The user can query and set the proper UPS control parameters for intelligent UPS management. It may automatically identify and adapt to 50/60Hz power supply system, fulfilling the requirements in various power supply systems. Perfect failure protection and alarm function: Provide complete failure protection and clear alarm notification function in case of I/O over-voltage or under-voltage, battery over-charge or under-voltage, overload, and short circuit.
High Reliability
Its cut-edge digital control technology of DSP (Digital Signal Processor) can deliver higher quality, performance and reliability. Higher payload and overload capability, better load compatibility, and suitable for various load type. Powerful Interference immunity capability in compliance with EMC requirements of IEC61000-4, deliver your device a clean electric environment.
| 0.8 UPS |
STANDARD |
DX6K |
DX10K |
DX6KL |
DX10KL |
DX3110KL |
DX3115KL |
DX3120KL |
| 0.8 UPS |
PROFESSIONAL |
DX6K-P |
DX10K-P |
DX6KL-P |
DX10KL-P |
DX3110KL-P |
DX3115KL-P |
DX3120KL-P |
| CAPACITY |
VA/W |
6KVA/4.8KW |
10KVA/8KW |
6KVA/4.8KW |
10KVA/8KW |
10KVA/8KW |
15KVA/12KW |
20KVA/16KW |
| INPUT |
Nominal Voltage |
220/230/240VAC |
380VAC |
| Voltage Range |
120-275VAC |
210-475VAC |
| Frequency Range |
46-64Hz: 50Hz, 60Hz auto sense |
| Phase |
Single phase with Ground |
Three phase (4 Wires+Ground) |
| Power Factor |
> =0.99 |
> =0.95 |
| OUTPUT |
Voltage |
220/230/240*(1± 1%)VAC |
| Frequency |
50/60Hz(Adjustable)
50Hz AC Mode: Follow AC Mode (AC Range 46~54Hz); Battery Mode: 50Hz(1± 0.1%)
60Hz AC Mode: Follow AC Mode (AC Range56~64Hz); Battery Mode: 60Hz(1± 0.1%) |
| Wave Form |
Pure Sine Wave |
| Power Factor |
0.8 |
| Harmonic Distortion |
=< 2% THD (Linear Load), =< 6% THD (Non-Linear Load) |
| Overload Capacity |
Normal when load < 105%; 105%-125% for 1min, 125%-150%for 30sec |
| Current Crest Ratio |
3: 1 |
| Connections |
Terminal block |
| Efficiency |
To AC Mode |
88% |
85% |
| To Battery Mode |
up to 90% |
| Battery |
Type |
Sealed free maintenance lead acid battery |
| Nominal DC voltage |
Built in batteries 12v7.2ah*16pcs |
192VDC |
192VDC |
| Quantity |
16pcs |
16pcs |
Depends on requested back-up time |
Depends on requested back-up time |
| Back-up Time (Full load) |
> =7 minutes |
> =5 minutes |
Depends on the capacity of external battery bank |
Depends on the capacity of external battery bank |
| Recharge Time |
7 hours to 90% |
Depends on the capacity of external battery bank |
Depends on the capacity of external battery bank |
| Charge current(MAX) |
2.0A |
4.2A or 8A |
4.2A or 8A |
| Charge voltage |
220Vdc ± 1% |
| Bypass |
Automatic Transfer |
On overload and UPS failure |
| Before UPS Power-on |
Default " ON" user adjustable to " YES" |
| Transfer Time |
|
Zero |
| Indicators |
LED Display |
UPS status, I/P & O/P voltage& frequency, Battery voltage, Battery capacity, Loading, Fault code |
| Audible Alarm |
|
Bypass, On battery mode, Battery low, Overload, Fault |
| Acoustic noise |
At 1 meter distance |
< 55dB |
< 60dB |
| Communications |
Intelligent RS232 serial port |
Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, Aix, True64, SGI IRIX, FreeBSD, HP-UX, and MAC |
| SNMP (Optional) |
Power management from SNMP manager and web browser |
| USB (Optional) |
Windows family software and Mac OS |
| Environmental |
Operating Temperature |
0~40 |
| Operating Humidity |
20~90% ( Non Condensing) |
| Weight |
Net weight (kg) |
57 |
67.5 |
18 |
20 |
27 |
35 |
35 |
| UPS Dimension |
L*W*H (mm) |
500*248*616 |
500*248*616 |
500*240*460 |
500*240*460 |
500*248*616 |
500*248*616 |
500*248*616 |
| There are two types: Standard type and Professional type, Professional type is with EPO, online maintenance and other functions. |
){kind=link}