| Customization: | Available |
|---|---|
| Nature of Source Flow: | Active Inverter |
| Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| LED Model | LW1000 | LW1500 | LW2000 | LW3000 | LW4000 | LW5000 | LW6000 | LW7000 | LW8000 | |
| LCD Model | LW1000-C | LW1500-C | LW2000-C | LW3000-C | LW4000-C | LW5000-C | LW6000-C | LW7000-C | LW8000-C | |
| Nominal Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | 7000W | 8000W | |
| AC Input | Phase & waveform | Single Phase & Pure Sine Wave | ||||||||
| Norminal Voltage | 120VAC/230VAC OR 220/230/240VAC | |||||||||
| Acceptable Voltage | 95-126VAC OR 194-253VAC±4% | |||||||||
| Line Low Disconnect | 85V±4% OR 184±4% (154 wide mode±4%) | |||||||||
| Line Low Reconnect | 95V±4% OR 194 ±4%(164 wide mode±4%) | |||||||||
| Line High Disconnect | 136V±4%/274±4% | |||||||||
| Line High Reconnect | 126V±4%/264±4% | |||||||||
| Frequency | 50Hz(41-54) or 60Hz(51-64) (auto sensing) | |||||||||
| Output | Phase & Waveform | Single Phase & Pure Sine Wave (bypass mode sync to input) |
||||||||
| Voltage | 110/120/130VAC OR 220/230/240VAC±10%rms (bypass mode sync to input) |
|||||||||
| Voltage Regulation | ±10%rms (bypass mode sync to input) | |||||||||
| Frequency | 50Hz±0.3Hz OR 60Hz±0.3Hz (bypass mode sync to input) |
|||||||||
| Peak Power | 3 times of rating power | |||||||||
| Short Circuit Protection | Yes, shutdown after 10ms | |||||||||
| Power Factor | 0.9-1.0 | |||||||||
| DC Input | Battery Voltage | 12/24Vdc | 12/24/48Vdc | 24/48Vdc | 48/72Vdc | |||||
| Minimum Start Voltage | 10V for 12V, 20V for 24V, 40V for 48V | |||||||||
| Low Battery Alarm | 10.5±0.3Vdc for 12V, 21±0.6Vdc for 24V, 42V±1.2for 48V | |||||||||
| Low Battery Transfer | 10V±0.3Vdc for 12Vdc, 20V ±0.6Vdcfor 24V, 40V ±1.2Vdcfor 48V |
|||||||||
| High Voltage Alarm | 16V±0.3 for 12V, 32V ±0.6for 24V, 64±1.2V for 48V | |||||||||
| High DC Input Recovery | 15.5±0.3Vdc or 31±0.6Vdc or 62V±1.2Vdc | |||||||||
| Max Charge Current | 20A/35A/50A/75A/90A(According to the inverter model) | |||||||||
| Transfer Efficiency | Line Mode | >96% | ||||||||
| Battery Mode | >85% | |||||||||
| System Parameter | Power Saver | Load<=25W(Enabled on "P/S auto"setting of Remote Control |
||||||||
| Audible Alarm | Souding when the heat sink 's temperature is over 100ºCand shut down after 30 seconds |
|||||||||
| Over Load Protection | 110%<Load<150%,beep 0.5s every 1s, and fault after 60s |
|||||||||
| Load>150%,beeps 0.5s every 1s,and fault after 20s | ||||||||||
| Protections | low battery,over charging,over temp,over load | |||||||||
| Communications | RS-232/USB/SNMP(custom-made) | |||||||||
| Operating Environment | 0-40ºC,0-90%RH(non-condensing) | |||||||||
| Audible Noise | <60dB | |||||||||
| Net Weight(KG) | 15.5 | 18 | 20 | 25.5 | 36 | 39.5 | 48 | 55 | 60 | |
| Dimension, L X W X H(mm) | 470×223×185mm | 650×223×185mm | ||||||||
){kind=link}